The Stainless Steel Inner Core is the industry leading measuring tool designed for use in Drill & Blast. These are made to withstand the harshest mining environments by featuring a thick protective coating.

The core is designed to not stretch under load and to handle the substantial requirements of Drill & Blast dipping and measuring. These does not tangle, knot, and are easy to wind up and slips effortlessly along wet ground. These have 0.5m markings, and have loops at both ends.

The post Polychain (Stainless Steel Core) appeared first on Westernex Australia.

• Probe: Stainless steel body and tip, polyethylene insulator 10 x 170 mm ( 3/8″ x 6.6″ )
• 3.2 mm ( 1/8″ ) diameter polyurethane jacket with two copper-clad, steel conductors inside
• Graduations are marked with laser and cannot be rubbed off
• Clean cable with laboratory grade detergent

The post Water Level Indicator Slope appeared first on Westernex Australia.

• For measuring the water level in wells and bore holes even in noisy conditions
• When the probe touches the water the LED on the winding device lights up
• At the same time as the LED lights, a buzzer sounds
• Refined steel probe with electrode and insulation
• Millimeter graduations, meters marked in red

The post Water Level Indicator Richter appeared first on Westernex Australia.

The post Tape Measure Fibreglass Tape Open Reel appeared first on Westernex Australia.

The post Surveyor’s Rope appeared first on Westernex Australia.

The Kinglong Polychain is a circular section rope type tape measure. It was originally designed for use in the mining and drilling industries.The Kinglon Polychain’s tough construction also makes it suitable for use in a range of other industries including construction, surveying, forestry, forensics and environmental field work.

The Kinglon Polychain’s circular construction and high tensile strength make it particularly suitable for high strain applications.

The Kinglon Polychain is free from Bromines, Lead, Mercury, Cadmium and Chromium and is approved by ISO 9001,9002,14001-2004.

Specifications:

Tensile Strength: 70Kg
Elongation Tolerance: Min 92.5mm/loaded with 5Kg for 100 Metre Polychain
Length Tolerance: Less than 50mm/loaded with 2Kg for 100 Metre Polychain
Material: Fiberglass coated with PVC
Graduations: Consecutively numbered per metre with contrasting markings every 50cm. 10cm markings for first metre.

The post Polychain Yellow appeared first on Westernex Australia.